This item will fit: Honda Accord NON VTEC F22 / F23 T3/T4 turbo kit

Fits:
94-97 F22  Non Vtec (4 cylinder only)
98-02 F23  Non Vtec (4 cylinder only)

• 1x F22-Series piping kit: 8 pieces total for turbo and intercooler setup. Light weight aluminum design. Adjustment are needed depends on engine layout and different setups.
• 1x JDM sport Intercooler: tube and fin design, 28x7.5x2.5 inch cord size.2.5inch in/outlet diameter, handles up to 30psi/500hp.
• 1x JDM sport T3/T4 Hybrid turbo w/ random filter: brand new built with 3inch diameter inlet, 2inch outlet, .50 A/R compressor, .63 A/R turbine .57 trim, and oil cooling system. 50+whp gain.
• X1 JDM Iron cast black manifold: Higher Resistance to Heat, Made to fit F22/23 Series Engines, Bolt on Manifold. Fits with t3/t4 hybrid turbo and 35mm/38mm wastegate. Professional Installation Highly Recommended.
• 1x JDM Type RS style Blow off valve w/ bov adapter: Quick response with high capacity Up To 1200HP or 25 PSI of Boost Pressure. Professional Installation Suggested. Aggressive blow off sound comes with bolt flange and hardware. Adapter piping can be bolt on or weld on, easy installation.
• 1x 38mm tail style wastegate w/ hardware: wastegate body and valve are investment cast from 253MA Stainless Steel (ASTM S30815).It intended to withstand high temperature and flow capability. With Turbo Boost Controller you will able to Adjust Spring rate from 1-30 Psi w/o Change Springs.
• 1x Turbo Boost Controller: in order avoid replacing wastegate springs, which only give a fixed increase, which is not adjustable, a boost controller will be the most cost effective solution. Allows adjustable boost psi settings, light weight design to be mount under the hood. Hardware is included.
• 1x JDM Oil Feed Line: designed to limits oil flow, prevent blown oil seal. 36 inch long with 3/8 diameter stainless steel line, hardware and gasket is included w/ 1/8 inch fittings for the engine.
• X8 silicon sealing couplers & x12 T-bolt clamps: 2.5 inch diameter couplers (color maybe vary) with flexible steel T-bolt clamps for better and stronger holdings to prevent leaking.

Most parts are bolt on but some items may require modifications. All item colors may vary. . Professional installation is highly recommended. We are not responsible for improper installation. Instructions are not included.

(Contents of kit are intended for a basic turbo install. High flow fuel injectors and high flow fuel pumps are recommended but not required)

Fullers Custom Shop has limited inventory most turbo kits are not directly stocked and take 1 - 4 weeks for shipment. Fullers Custom Shop reserves the right to special order turbo kits and in certain cases back order or cancel orders due to non availability. On hand quantity's may be sold through website decreasing available inventory. Out of country orders require additional shipping fees and will extend shipping times. See terms and Conditions for all our policy's